Table of Contents
Advertisement
10.1 Pyrolytic cleaning
Remove all accessories and re-
movable shelf supports.
Do not start the pyrolytic
cleaning if:
• You did not remove the shelf
supports or telescopic shelf
runners (if supplied). In some
models, the display shows
"C1" when this error occurs.
• You did not fully close the
oven door. In some models,
the display shows "C3" when
this error occurs.
1.
Remove the worst dirt manually.
2.
Set the Pyrolytic cleaning function.
Refer to "Oven functions".
3.
When
flashes, press
set the necessary procedure:
– P1 – If the oven is not very dirty.
The procedure is 1:30 h long.
– P2 – If you cannot easily remove
the dirt. The procedure is 2:30 h
long.
After 2 seconds the procedure
starts.
To change the default length of the
procedure (P1 or P2), press
, and then press
the length of the pyrolytic proce-
dure.
You can use the End function to de-
lay the start of the cleaning proce-
dure.
When the oven is at its set tempera-
ture, the door locks. The display
shows the symbol
the heat indicator until the door un-
locks.
During pyrolytic cleaning the
lamp is off.
or
to
to set
or
to set
and the bars of
Cleaning reminder
To remind you that the pyrolytic clean-
ing is necessary, PYR flashes in the dis-
play for 10 seconds after each activation
and deactivation of the appliance.
The cleaning reminder goes
out:
• After the end of the Pyrolytic
cleaning function.
• If you press "
at the same time while PYR
flashes in the display.
10.2 Lamp
WARNING!
There is a risk of electrical shock.
The lamp and the lamp glass
cover can be hot.
Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the
interior of the appliance. It pre-
vents damage to the lamp glass
cover and the cavity.
Always use the same lamp type.
Replacing the lamp at the cavity
ceiling:
1.
Turn the lamp glass cover counter-
clockwise to remove it.
2.
Clean the glass cover.
3.
Replace the lamp with a suitable 300
°C heat-resistant lamp.
4.
Install the glass cover.
ENGLISH
27
" and "
"
Hide quick links:
Advertisement
Table of Contents
