Vector JUMP-START SYSTEM Owner's Manual & Warranty Information page 7

1
3
11
FIGURE 1A (Front View)
1. Reverse connection indicator
2. Good connection indicator
3. 12 Volt DC Accessory Socket with 20 amp overload protection
4. Battery Level Push Button
5. LED Charging/Battery Level Indicators
6. Heavy-Duty Welding Quality Jumper Cables
7. Heavy-Duty 450 Amp Clamps
8. 110/120 Volt UL approved AC/DC Charging Adapter
9. 12 Volt DC/DC Charging Adapter
10. Light ON/OFF Switch
11. AC Recharge Adapter barrel connector receptacle
11. Area Worklight
ADDITIONAL FEATURES
Includes non-spillable, maintenance-free, heavy-duty, new high energy density
•
19 Amp hour, sealed battery
Sturdy and unique compact design provides up to 35 hours of completely portable
•
12 Volt DC power
Safe to use, transport, and store. Includes an audible polarity alarm
•
Requires no maintenance (other than recharging) for optimum operation
•
Automatic taper charge for AC recharge
•
Audible alarm for reverse polarity
•
Molded high-impact case is tough and durable
•
Built-in emergency/worklight with long lasting LED's for roadside repairs and
•
use in remote locations without utility power
CAUTION: Use only adapters supplied with this unit. Never insert any other
adapters into the charging or power receptacles on this unit.
5
2
5
4
10
8
FIGURE 1B (Rear View)
9
6
7