Emergency/Worklight; Replacement Parts; Battery Replacement; Battery Disposal - Vector JUMP-START SYSTEM Owner's Manual & Warranty Information

Jump-start system 12 volt dc power supply
Table of Contents

Advertisement

5.
EMERGENCY WORKLIGHT
The Worklight is controlled by an On/Off switch. Make sure the lamp is turned OFF
when the unit is being recharged or stored.
6.

REPLACEMENT PARTS

For replacement parts (bulbs, batteries, fuses, etc.), contact Vector Customer
Service: (954) 584-4446 or toll-free (866) 584-5504.
6.1

Battery replacement

It is recommended that the unit be returned to Vector Customer Service for
battery replacement: Contact (954) 584-4446 or toll-free (866) 584-5504.
WARNING
• Do not dispose of the battery in fire as this may result in an explosion
• Before disposing of the battery, protect exposed terminals with heavy-duty
electrical tape to prevent shorting (shorting can result in injury or fire)
• Do not expose battery to fire or intense heat as it may explode
6.2

Battery disposal:

This unit contains a maintenance-free, non-spillable, sealed lead-acid battery.
This battery is fully recyclable and should be accepted at any location that
accepts common automotive starter batteries. Examples of places that accept
these batteries are: County or municipal recycling drop-off centers, scrap metal
dealers and retailers who sell automotive replacement lead acid starter batteries.
For more information on recycling this battery, call toll-free (877) 288-7722.
7.

SPECIFICATIONS

Model No . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VEC012APM
Peak Ampere
Boost Ampere
HEIGHT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12.75 in. (32.39 cm)
WIDTH
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 in (27.94 cm)
DEPTH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.5 in (13.97 cm)
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 lbs. (7.26 Kg)
Battery Type
Jumper Cables . . . . . . . . . . . . . . . . . . . . . .Heavy Duty, Welding Cable
Cables Clamps . . . . . . . . . . . . . . . . . . . 450 Amp, Heavy Duty Clamps
Area Light
. . . . . . . . . . . . . . . . . . . . . Three high Intensity White LEDs
Accessory Socket
DC Charging Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Volt DC
AC Charging Adapter . . .110/120 Volt AC (700mA, 12 Volt DC Output)
Reverse Polarity Detection
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1200 Amps
. . . . . . . . . . . . . . . . . 450 Instantaneous Cranking Amps
12Volt, 19AH/20HR Sealed, Rechargeable
. . . . . . . . . . . . . . . . .Self-Resetting Breaker 20 Amps
. . . . . . . . . . . . . . . . . . . . . . .2.5 Volts (min)
Non-Spillable, Maintenance-free,
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vec012apm

Table of Contents