Understanding The Beeps; Stacked Code Crackle - Intermec SR61T User Manual

Understanding the Beeps

Stacked Code Crackle

SR61T Tethered Scanner User's Guide
The SR61T beeps to give you audio feedback when performing some
functions. For example, you hear a beep each time you scan a valid bar
code.
Default SR61T Beep Descriptions
Beep Sequence
Two beeps
Single beep
Two fast beeps
Six very fast beeps Transmission error
When using SR61TL (laser scanner) by default the scanner makes a
crackle noise when reading stacked codes (such as PDF417). For more
information see EasySet.
Note: You can modify many of the default settings for the light, beeps
and crackle using EasySet version 5.6.4.0 or higher. EasySet is
available on the Intermec website at
Chapter 2 — Scanning With the SR61T
What it Means
Power-up
The scanner successfully scanned a bar code.
Configuration bar code successfully scanned
OR
Configuration bar code was not accepted
www.intermec.com/EasySet.
11