Know Your Pressure Washer - Generac Portable Products 2100PSI Owner's Manual

KNOW YOUR PRESSURE WASHER

Read this owner's manual and safety rules before operating your high pressure washer.
Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
High Pressure Hose
Recoil Starter
Throttle Control Lever
Air Filter
Choke Lever
Water Inlet
Adjustable Nozzle
Accessory Tray — Provides convienant storage for
standard and optional accessories, such as brushes, turbo
wands, ect.
Adjustable Nozzle — Always attached to nozzle
extension. Adjustable nozzle allows you to adjust spray
pressure and spray pattern.
Air Filter — Dry type filter element limits the amount of
dirt and dust that gets in the engine.
Automatic Cool Down System — Cycles water
through pump when water reaches 140°-145°F. Warm
water will discharge from pump onto ground. This system
prevents internal pump damage.
Chemical Injection Siphon/Filter — Use to siphon
detergent or other pressure washer chemicals into the low
pressure stream.
Generac Portable Products 2,100 PSI High Pressure Washer
Accessory Tray
Pump equipped with Automatic
Cool Down System
Choke Lever — Prepares a cold engine for starting.
High Pressure Hose — Connect one end to water
pump and the other end to spray gun.
High Pressure Outlet — Connection for high pressure
hose.
Oil Fill/Dipstick — Check and fill with oil here.
Pump — Develops high pressure.
Recoil Starter — Used for starting the engine manually.
Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes safety latch.
Throttle Control Lever — Sets engine in starting mode
for recoil starter and stops a running engine.
Water Inlet — Connection for garden hose.
4
Spray Gun
Chemical Injection
Siphon/Filter
Oil Fill/Dipstick
High Pressure Outlet