Table of Contents
Advertisement
System Overview (cont'd)
Zones
Your system's sensing devices have been assigned to various "zones." For
example, the sensing device on your Entry/Exit door may have been assigned
to zone 001, sensing devices on windows in the master bedroom to zone 002,
and so on. These numbers will appear on the display, along with an alpha
descriptor for that zone (if programmed), when an alarm or trouble condition
occurs.
Fire Protection
The fire protection portion of your security system (if used) is always on and
will sound an alarm if a fire condition is detected. Refer to the Fire Alarm
System section for important information concerning fire protection, smoke
detectors and planning emergency exit routes from your facility.
Burglary Protection
The burglary protection portion of your system must be turned on or "armed" before it
will sense burglary alarm conditions. Your system provides four modes of burglary
protection: STAY, AWAY, INSTANT and MAXIMUM, and even allows you to
BYPASS selected zones of protection while leaving the rest of the system armed. The
system also provides a CHIME mode, for alerting users to the opening and closing of
doors and windows while the system is disarmed. Refer to the other sections of this
manual for procedures for using these features.
The following table lists the four different arming modes and the results of each.
Arming Mode
AWAY
STAY✳
INSTANT✳
MAXIMUM
✳The system provides three different STAY and INSTANT arming modes. See
ARMING IN THE STAY MODES and ARMING IN THE INSTANT MODES
sections for details on these modes.
– 6 –
Features For Each Arming Mode
Exit Delay
Entry Delay
Yes
Yes
Yes
Yes
Perimeter Armed
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Hide quick links:
Advertisement
Table of Contents
