Programming Device Timers; General Information - First Alert FA1670C User Manual

General Information

Device timers consist of an ON time and an OFF time, and selected days of
the week in which they are active. There are up to 20 timers that can be used
to control various devices, such as lights or appliances. Your installer will
have programmed the appropriate devices into the system (up to 96 devices
can be programmed).
Each timer controls a single device (designated as an output number) that
you select. For example, timer 1 might be set to turn the porch lights on at
7:00pm and turn them off at 11:00pm. Timer 2 might turn on the air
conditioner Monday-Friday at 4:30pm to cool the premises before you arrive
at 5:00pm, and turn it off at 10:00pm when you are retiring for the night. If
desired, different timers can control the same device. For example, timer 2
could be used Monday-Friday as in the previous example, and timer 3 could
be set to turn the air conditioner on and off at different times Saturday and
Sunday.
To enter the device timer menu mode:
Enter your security code, then press the # key followed by 83.
OUTPUT TIMER # ?
01-20,00=QUIT 01
06 07:00P 11:45P
PORCH LITE
See your installer for
00 ENTER OUTPUT#
device numbers.

Programming Device Timers

Up to 20 timers can be programmed. A number 1-
20 identifies each timer. Enter the desired timer
number to be programmed (1-20). Press * to
accept entry.
If that timer
programmed, a summary screen will appear. In
04
this example:
06 = Timer #
04 = Output Device # affected by this timer
PORCH LITE = Output Descriptor for Device 4
07:00PM = Start Time;
11:45PM = Stop Time
Press * to continue.
Enter the desired output device number (1-96).
As the number is entered, the device's description
00
will appear.
To delete a previously programmed timer, enter
00 as the output number.
number has already been
– 49 –