Reliable EnviroMate GO E20 Instruction Manual page 21

CONNECTION TO THE
POWER SOURCE
Before connecting the machine to the
power source ensure that:
machine stated on the data plate are
compatible with the electrical system.
machine will be plugged complies with
the local regulations and has a safety
switch for a fault current that does not
exceed a value of 30 mA.
machine must be plugged has a rating
of 16 A and is properly grounded
abrasions and is in perfect condition.
CAUTION
Never connect the plug to the power supply if
it is wet or if you have wet or damp hands.
CAUTION
Never pull the electrical cord to unplug unit
from the electrical outlet. Instead, take the
plug between forefinger and thumb and pull
slowly and firmly.
ATTENTION
CAUTION
Before putting the plug in the power outlet,
make sure the main power switch of the
ATTENTION
machine is in the "0" position.
CAUTION
IMPORTANT
If the power cord is damaged, it must be
replaced directly by the manufacturer or by
qualified personnel an authorized technical
ATTENTION
service centre.
IMPORTANT
19