Water Shortage - Reliable EnviroMate GO E20 Instruction Manual

CAUTION

WATER SHORTAGE

For models EnviroMate GO:
The red indicator light 8 comes on to warn
there is no more water in the tank.
ATTENTION
Do not leave the boiler without water for a
long time: this could result in damage to the
machine.
For model EnviroMate VIVA:
IMPORTANT
sounds, the tank is running out of water and
steam flow will be interrupted.
Two options:
CAUTION
First unscrew the boiler cap with two-three
turns very slowly (while holding it pressed
down) to eliminate any residual pressure, then
remove the cap.
ATTENTION
IMPORTANT
26
REFILLING THE TANK WITH WATER
For models EnviroMate GO:
Disconnect the machine from the power
source and proceed as follows:
pressure in the boiler can drop, then
loosen the boiler cap 1 two-three
turns very slowly while holding the cap
pressed down to eliminate any residual
pressure.
CAUTION
0.5 litres up to the max recommended
level indicated on page 4 "Technical
careful to avoid any water spillage.
and hold it pressed down to screw it
completely.
ATTENTION
Low water level is also signalled by a
reduction of the steam jet.
For model EnviroMate VIVA:
Disconnect the machine from the power
source and proceed as follows:
CAUTION
IMPORTANT
counter-clockwise and pour water up to
the max level.
For this operation, we recommend
your work.
ATTENTION
The water shortage is also signalled by a
reduction of the steam jet force.