Epson WristableGPS SS-700 User Manual page 68

Chapter 7
Measuring Heart Rate (SS-700/SS-500 Only)
Use /
After confirming the selection, the [Settings] screen is displayed.
When [HR Sensor] is set to [ON],
and interval measurement screen.
Hold down
[Menu] screen.
When the HR sensor is set to [ON], the battery life for the device is reduced ( P. 16).
When you are not using the HR sensor, set [HR Sensor] to [Off ].
To turn this function off, select [OFF] in step
When the [HR Sensor] is set to [ON], you can measure your heart rate while using the
chronograph, exercise, or interval functions.
You can check the status of the HR sensor from the measurement icon on the screen.
Measurement screen: Chronograph
to highlight [ON], and then press
for at least two seconds to return to the
On
Flashing : Cannot communicate with the HR sensor.
is displayed on the chronograph, exercise,
.
: Communicating with the HR sensor.
68
.