Epson WristableGPS SS-700 User Manual page 52

Chapter 4
Using the Interval Function
Press while measuring has been stopped to reset the
measurement display.
When you reset the display, values, such as the number of exercise routines,
return to zero allowing you to start the next measurement.
Data that has been measured up to that point is stored in the device's memory.
· After resetting, hold down
[Menu] screen. By updating the GPS data, the GPS measurement data is recorded. The
recorded data is used to increase the measurement accuracy for distance and pace.
· If 60 minutes pass without any measurements being made (if the device is stopped or
before measuring), the [Menu] screen is displayed.
· You can use [Recall] to check the stored measurement data (
for a few seconds to update GPS data and return to the
52
P. 55).