Epson WristableGPS SS-700 User Manual page 112

Chapter 9
Usage Guide (Screen Settings According to Your Needs)
Checking the measurement screen
Press to change to screen 2 and then run.
You can check the time difference between your current time and target time in guide
time, and the difference between your current distance and target distance in guide
distance.
When displaying the guide time and distance, an arrow indicating if you are behind
your target or if you have exceeded your target is shown on the left. This allows you to
note how close you are to exceeding your target while running.
(Pointing down) : Slower than target pace
(Pointing up)
Guide time display example
Arrow icon
Guide distance display example
Arrow icon
· The displayed guide time and guide distance are calculated using the [Target Pace]
settings. Set the [Target Pace] before starting measurements (
· Although the display name is always the same, "Guide", the guide time and distance are
differentiated by numbers or units.
: Faster than target pace
Guide time
(Time behind/exceeding the target pace)
Guide distance
(Distance behind/exceeding the target pace)
112
P. 36).