Connecting The Device To A Computer And Using Neorun - Epson WristableGPS SS-700 User Manual

Chapter 10
Data Management Using the Web Application

10-2 Connecting the device to a computer and using NeoRun

Connect the device to the computer on which NR Uploader is installed.
Connect the USB cable to the computer on which
NR Uploader is installed and to the cradle.
Place the product into the cradle.
Do not place the device in the cradle if it is wet from water or sweat.
Match the direction of the EPSON logo on the product with the EPSON logo
on the cradle, and then press until it is fixed in place.
NR Uploader starts.
If NR Uploader does not start, the device has not been recognized by the computer.
Update the driver software (
Caution
Make sure the device is placed in the
correct direction. A problem could
occur if it is forced into the cradle in
the wrong direction.
P. 121).
119