Epson WristableGPS SS-700 User Manual page 48

Chapter 4
Using the Interval Function
· It usually takes within two minutes to complete a GPS search. If the GPS search does not
finish after three minutes or more, you may be in an environment where GPS signals
cannot be received. Select [Cancel] to stop the search, and then try again in another
location.
· If the GPS search does not finish after 10 minutes, the search is stopped and the [Menu]
screen is displayed.
· If you select [GPS off ] on the [Searching] screen, the GPS sensor turns off which allows you
to use the interval function. However, measurement items are limited at this time (
When [GPS off ] is selected, distance is not measured. Set the length of time for sprint/
rest ( P. 44). For SS-700/SS-500, when the stride sensor is enabled (
sprint/rest length for Distance.
· See "Setting GPS (GPS search)" (
· If 60 minutes pass without any measurements being made (if the device is stopped or
before measuring), the [Menu] screen is displayed.
P. 24) for more details on making a GPS search.
48
P. 21).
P. 59), you can set the