Advertisement
To clear this error, select Clear Warning
from the control panel's Reset Menu. See
"How to access the control panel menus" for
instructions.
HDD Check
The printer is checking the Hard Disk Drive.
Image Optimum
There is insufficient memory to print the
page at the specified print quality. The
printer automatically lowers the print
quality so that it can continue printing. If the
quality of the printout is not acceptable, try
simplifying the page by limiting the number
of graphics or reducing the number and size
of fonts.
To clear this error, select Clear Warning
from the control panel's Reset Menu. See
"How to access the control panel menus" for
instructions.
Turn the Image Optimum setting off on the
control panel's Printing Menu if you do not
want the printer to automatically lower the
print quality to continue printing.
You may need to increase the amount of
printer memory to be able to print at the
desired print quality for your document. For
more information on adding memory, see
"Memory module" in the Reference Guide.
Install Photocondctr
There is no photoconductor unit installed or
the photoconductor unit is not installed
properly. Install the photoconductor unit if
it is not installed.
EPSON AcuLaser C1900 Quick Reference
If a photoconductor unit is already installed,
open the front cover, then remove the waste
toner collector. Remove the photoconductor
unit, then reinstall it correctly. Reinstall the
waste toner collector, and close the front
cover. The error clears automatically if the
photoconductor unit is installed correctly.
Install Waste T Box
The waste toner collector is not installed, or
is installed incorrectly. If there is no waste
toner collector installed, install one in the
printer. If there is a waste toner collector
already installed, try removing it and
reinstalling it. See "Replacing the waste
toner collector" in the Reference Guide for
instructions.
Invalid AUX I/F Card
This message means that the printer cannot
communicate with the installed optional
interface card. Turn off the printer, remove
the card, then reinstall it.
Invalid HDD
Either the optional Hard Disk Drive is
damaged or it cannot be used with this
printer. Turn off the printer and remove the
Hard Disk Drive.
Invalid PS3
An optional PostScript 3 ROM module that
cannot be used on this printer is installed.
Turn off the printer and remove the module.
Invalid ROM A
The printer cannot read the installed
optional ROM module. Turn off the printer
and remove the ROM module.
Status and Error Messages (3/7)
Advertisement
