Privacy Screen - Aztech HomePlug Turbo Easy Start

4.2

Privacy Screen

The Privacy dialog screen provides a means for managing the local network and providing
additional security. All HomePlug devices are shipped using a default logical network (network
name), which is normally "HomePlug". The Privacy dialog screen allows user to make the
network private by changing the network name (network password) of devices. The user can
always reset a HomePlug network to the universal one (public) by entering "HomePlug" as the
network name or by clicking on the Use Default button. See Figure 1-10.
Changing the network name to any other name other than HomePlug will show
the network type on the main screen as Private. The Network Name is between
4 to 24 characters.
The Set Local Device Only button is used to change the network name (network password) for
the local device only. After doing this, all the devices seen on the Main panel prior to this will no
longer be able to communicate or respond to the computer, as they will be on a different logical
network. Devices previously set up with the same logical network (same network name) will
appear in the device list afterward selecting this option.
The Set All Devices button is used to change the logical network of all devices that appear on
the Main panel. The user must have entered the Device Password in order to set it to the new
logical network. A notification message will appear to report the success of this operation.
Easy Start
Note...
Figure 1-10 : Privacy Screen
Easy Start Page 17 of 20