Aztech HomePlug Turbo Easy Start page 16

The Add button is used to add a remote device to your network that is not on the displayed list in
the lower panel, for example, a device currently on another logical network. Users are advised to
locate the Device Passwords for all devices they wish to manage and add them to the local
logical network by clicking on the Add button. A dialog box will appear as in Figure 1-9. The
dialog box allows the user to enter both a Device Name and the Device Password.
A confirmation box will appear if the password was entered correctly and if the device was
found. If a device is not found, the user will be notified and suggestions to resolve common
problems will be presented.
The device must be present on the power line (plugged in) in order for the
password to be confirmed and added to the network. If the device could not be
located, a warning message will be shown.
The Scan button is used to perform an immediate search of the HomePlug devices connected to
the computer. By default the utility automatically scans every few seconds and updates the
display.
Easy Start
Figure 1-9 : Adding Device To Network
Note...
Easy Start Page 16 of 20