Registering Your Handset; Mounting And Removing The Belt Clip - Aastra DECT 142 User Manual

Omm sip

Hide thumbs Also See for DECT 142:

Table of Contents

Installation

Registering Your Handset

Your handset can be operated on up to ten different communications systems. To do so, it has to be

registered to each system.

Your system administrator will register the handset for operation on a communications system with

OpenMobilityManager.

If you want to register your handset on any other communications system, please refer to the rele-

vant documentation. If you want to register the mobile handset on another GAP-compatible sys-

tem, the system will at first reject the registration, so you have to activate the "GAP only" feature in

the "System > Subscriptions" menu (see page 52). In this setting, only GAP-compatible features are

available. When the handset is operated on a communications system with OpenMobilityManager

(OMM), this feature must not be activated.

Push the adapter ring over the back of the handset until it

snaps into the openings on the side. To remove the

adapter, pull the two sides slightly apart.

Mounting the belt clip: Press the upper parts of the belt

clip together as shown, push it over the belt, then release

the end of the clip again.

Fastening the handset: Using the adapter ring, push your

handset into the belt clip until it snaps audibly into place.

Removing your handset: Press the release button and pull

the handset upwards and out of the belt clip.

Table of Contents

Phone 142