Factory Settings - Fujitsu Plasmavision P42HHS10W User Manual

FACTORY SETTINGS

This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value
of the first input signal.
To do this, select a desired signal and follow the instructions in "Adjusting Screen Position and Size" on P. E-34–E-35 to adjust the
parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be
displayed in accordance with the settings you most recently selected.
Main corresponding signals (RGB mode)
Display (dots x lines) Horizontal frequency (kHz)
640 x 480 31.47
640 x 480 37.50
640 x 480 43.27
720 x 400 31.47
800 x 600 37.88
800 x 600 46.88
800 x 600 53.67
1024 x 768 48.36
1024 x 768 60.02
1024 x 768 68.68
1280 x 1024 63.98
1280 x 1024 79.98
1600 x 1200 75.00
1600 x 1200 106.25
848 x 480 31.02
852 x 480 31.72
1360 x 768 47.71
720 x 485 15.73
720 x 575 15.63
* With some input signals, "Out of range" may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make
sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/XGA/UXGA, 75 Hz or less for SXGA.
*
In the DVI-D mode, the input signal can be restricted partly.
In the Comp.video and Video/S-video modes, the display has been factory-set as follows for different input signals:
Main corresponding signals (Comp.video mode)
Horizontal Vertical
frequency (kHz) frequency (Hz)
15.73 59.94
15.63 50.00
31.47 59.94
31.25 50.00
45.00 60.00
37.50 50.00
33.75 60.00
28.13 50.00
• Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.
• "Out of range" appears if the display receives a signal whose characteristic does not fall within the display's permissible range.
• You can check input signals through "Information" on the FEATURES Menu screen. (See P. E-44.)
• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.
• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.
Vertical frequency (Hz)
59.94
75.00
85.01
70.09
60.32
75.00
85.06
60.00
75.03
84.99
60.02
75.03
60.00
85.00
60.00
59.97
60.01
59.94
50.00
Main corresponding signals (Video, S-video mode)
Horizontal
Signal
frequency (kHz)
SDTV 480I 15.73
SDTV 576I 15.63
15.63
SDTV 480P
SDTV 576P 15.63
HDTV 720P 15.63
HDTV 720P 15.73
HDTV 1080I 15.73
HDTV 1080I
Signal
VGA
VGA 75 Hz
VGA 85 Hz
400 lines
SVGA 60 Hz
SVGA 75 Hz
SVGA 85 Hz
XGA 60 Hz
XGA 75 Hz
XGA 85 Hz
SXGA 60 Hz
SXGA 75 Hz
UXGA 60 Hz
UXGA 85 Hz
60 fields
50 fields
Vertical
Signal
frequency (Hz)
59.94 NTSC
50.00 PAL
50.00 SECAM
59.52 PAL60
50.00 N-PAL
59.95 M-PAL
59.94 4.43NTSC
DVI-D
E-47