Factory Settings - Fujitsu Plasmavision PDS4213W-H User Manual

FACTORY SETTINGS

This display can store parameter settings for eight additional signals for both RGB1 and RGB2.
To do this, select a desired signal and follow the instructions in "Adjusting Screen Position and Size" on P. E-28–E-29 to adjust the
parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, images will be
displayed in accordance with the settings you most recently selected.
This display has been factory-set for 18 different signals as shown below.
Factory-set signals (RGB1, RGB2 modes)
Display (dots x lines)
852 x 480 31.72
640 x 480 31.47
640 x 480 37.86
640 x 480 37.50
640 x 480 43.27
720 x 400 31.47
640 x 400 37.86
800 x 600 35.16
640 x 400 37.88
800 x 600 48.08
800 x 600 48.88
1024 x 768 48.36
640 x 480 35.00
848 x 480 31.02
640 x 480 15.73
640 x 480 15.63
640 x 400 24.82
640 x 400 31.50
15.63 to 80.00*
* With some input signals, "Out of range" may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make
sure that the vertical frequency of the input signal is 75 Hz or less for SVGA and 60 Hz for XGA.
In the Comp.video and Video/S-video modes, the display has been factory-set as follows for different input signals:
Factory-set signals (Comp.video mode)
Horizontal Vertical
frequency (kHz) frequency (Hz)
15.73 59.94
15.63 50.00
31.47 59.94
45.00 60.00
44.96 59.94
33.75 60.00
33.72 59.94
• The dedicated graphics card is optionally available.
• With the 800 x 600 and 1024 x 768 modes, images of reduced size are displayed on the screen, using size reduction and interpolation. Note also
that on-screen information is also displayed in reduced size.
• "Out of range" appears if the display receives a signal whose characteristic does not fall within the display's permissible range.
• You can check input signals through "Status" on the OTHERS Menu screen. (See P. E-32–E-34.)
• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.
Horizontal frequency (kHz)
Signal
SDTV 525i
SDTV 625i
SDTV 480p
HDTV 720p
HDTV 720p
HDTV 1080i
HDTV 1080i
Vertical frequency (Hz)
59.97
59.94
72.81
75.00
85.01
70.09
85.08
56.25
60.32
72.19
75.00
60.00
66.67
60.00
59.94
50.00
56.42
70.15
50.00 to 120.00*
Factory-set signals (Video, S-video mode)
Horizontal
frequency (kHz)
15.73 59.94
15.63 50.00
15.63 50.00
15.73 59.97
15.73 59.97
15.63 50.00
Signal
When a dedicated graphics card is used
VGA
VGA 72 Hz
VGA 75 Hz
VGA 85 Hz
VGA 400 lines
VGA 400 lines
SVGA 56 Hz
SVGA 60 Hz
SVGA 72 Hz
SVGA 75 Hz
XGA 60 Hz
MAC 13RGB
60 fields
50 fields
NEC 24 kHz
NEC 31 kHz
User setting
Vertical
Signal
frequency (Hz)
NTSC
PAL
SECAM
4.43NTSC
M-PAL
N-PAL
E-41