Saving A Frame From A Movie As A Still Image - Nikon Coolpix L830 Reference Manual

5
Use HI to select m (Save) and press the
k button.
Follow the instructions on the screen to save the movie.
B
Notes About Movie Editing
A movie that was created by editing cannot be trimmed again.
The actual trimmed portion of a movie may differ slightly from the portion selected using the start
and end points.
Movies cannot be trimmed so that they are less than two seconds long.

Saving a Frame from a Movie as a Still Image

A frame from a recorded movie can be extracted and saved as a still image (except for movies
recorded with Z 1080/60i or U 1080/50i).
Pause movie playback so that the frame to be extracted is
displayed (A 71).
Use the multi selector JK to select the H control, and
then press the k button.
When the confirmation dialog is displayed, select Yes and
press the k button to save.
The image size of the still image that is saved varies
depending on the type (image size; E52) of the original
movie.
E26
Save
3 0 s 3 0 s
1 m 3 0 s 1 m 3 0 s
1 m 3 0 s 1 m 3 0 s
Copy this frame as a still image?
Yes
No