Table of Contents
Advertisement
Problem
Flash does not fire.
Digital zoom cannot be
used.
Image mode not available.
No sound when shutter is
released.
AF-assist illuminator does
not light.
Images appear smeared.
Colors are unnatural.
Randomly spaced bright
pixels ("noise") appear in
image.
F10
Cause/Solution
The flash is lowered.
A scene mode that restricts the flash is selected.
On is selected for Blink proof in the smart portrait
menu.
A function that restricts the flash is enabled.
Digital zoom cannot be used in the following situations.
- When Portrait, Night portrait, Night
landscape, Backlighting (when HDR is set to
o), Easy panorama, or Pet portrait is
selected in scene mode
- When smart portrait mode is selected
- When Continuous in the shooting menu is set
to Multi-shot 16
- When AF area mode in the shooting menu is
set to Subject tracking
A function that restricts the Image mode option is
enabled.
Off is selected for Sound settings > Shutter
sound in the setup menu. No sound is produced
with some shooting modes and settings, even
when On is selected.
Do not block the speaker.
Off is selected for the AF assist option in the setup
menu. AF-assist illuminator may not light depending
on the position of the focus area or the current scene
mode, even when Auto is selected.
The lens is dirty. Clean the lens.
White balance or hue is not adjusted properly.
The subject is dark, and the shutter speed is too slow
or ISO sensitivity is too high. Noise can be reduced by:
Using the flash.
Specifying a lower ISO sensitivity setting.
A
5, 44
51
54, E41
55
32
40
54, E32
54, E36
55
72, E65
1
72, E65
F6
34, 54,
E29
44
54, E34
Hide quick links:
Advertisement
Table of Contents
