Table of Contents
Advertisement
Shooting Issues
Problem
Cannot switch to shooting
mode.
No image captured when
the shutter-release button is
pressed.
Camera cannot focus.
Images are blurred.
Bright specks appear in
images captured with flash.
Cause/Solution
Disconnect the HDMI cable or USB cable.
When the camera is in playback mode, press the
A button or the shutter-release button.
When menus are displayed, press the d button.
The batteries are exhausted.
When the flash lamp is flashing, the flash is
charging.
The subject is too close. Try shooting using easy
auto mode, Close-up scene mode, or macro
mode.
The subject is hard to focus on.
Set AF assist in the setup menu to Auto.
Turn the camera off and then on again.
Use the flash.
Increase the ISO sensitivity value.
Enable vibration reduction or motion detection.
Use D (Best Shot Selector).
Use a tripod to stabilize the camera when shooting
(using the self-timer at the same time is more
effective).
The flash is reflecting off particles in the air. Lower the
flash.
A
74, 77,
E16,
E19
1, 28
3
20
46
31, 34, 49
60
72, E65
20
44
54, E34
72, E63,
E64
35, E32
47
5
F9
Hide quick links:
Advertisement
Table of Contents
