Automatic Relocation - Toshiba Strata DK System Administration Manual

Automatic Relocation

This function enables you to physically move a telephone from one location to another
while maintaining all of the telephone's programmed features. Use the
Location Record" on Page 45
To turn on the Auto Station Relocation feature
1. From the
Administrator station,
press a [DN] +
Auto Station
Relocation feature.
2. Press
To physically relocate (swap) Station A and B
Important!
1. Verify that the
telephone jack for the
new location does not
have a telephone
connected.
2. Unplug the telephone
that is moving from
its wall jack at the old
location.
Strata DK System Administrator Guide 5/00
for telephone location tracking.
You hear a confirmation tone indicating the Station
Relocation feature is on. If you hear a busy tone, the
Station Relocation feature is already turned on, or you
to turn on the did not dial from the Administrator station.
.
Make sure that the location that the phone is moving to is already
vacant.
If you are moving a telephone (for example, Station A) to a new location
that already has a telephone connected to it (for example, Station B),
disconnect Station B from its telephone jack before you disconnect
Station A.
You cannot configure the moving station (Station A) to an already
occupied station (Station B).
Setting System Parameters
Station Relocation
"Telephone
15