Table of Contents
Advertisement
Available languages
Available languages
English
Parts supplied
USB cable
Adapter cable
MHL adapter × 1
(HDMI Type A - D) × 1
(Type USB A - A) × 1
USB - micro USB cable
High Speed HDMI
®
(Type A - A) × 1
(Type USB A - micro USB B) × 1
• Use only the cables included in this connectivity kit to ensure proper connection.
• Do not use the cables included in this connectivity kit for other models.
Connecting the in-vehicle product using HDMI cables
USB - micro USB cable
USB cable
(Type USB A - micro USB B)
(Type USB A - A)
0.75 m (2 ft. 6 in.)
1.5 m (4 ft. 11 in.)
High Speed HDMI
®
Cable
Adapter cable
(Type A - A)
(HDMI Type A - D)
1.5 m (4 ft. 11 in.)
0.75 m (2 ft. 6 in.)
Notes:
• The positions of the HDMI terminals
and USB port differ depending on the
in-vehicle product. For details of the ter-
minals' positions, refer to the manual of
USB port
HDMI terminal
each product.
• The MHL adapter will not be used if you
use the adapter cable (HDMI Type A-D).
Connecting the in-vehicle product using the MHL adapter
USB cable
USB - micro USB cable
(Type USB A - A)
(Type USB A - micro USB B)
0.75 m (2 ft. 6 in.)
1.5 m (4 ft. 11 in.)
High Speed HDMI
Cable
®
(Type A - A)
1.5 m (4 ft. 11 in.)
Cable
Notes:
• The positions of the HDMI terminals
and USB port differ depending on the
in-vehicle product. For details of the ter-
minals'positions, refer to the manual of
each product.
• The adapter cable (HDMI Type A-D) will
USB port
HDMI terminal
not be used if you use the MHL adapter.
Notes:
• Secure all wiring with cable clamps or
electrical tape. Do not allow any bare
wiring to remain exposed.
• Route and secure all wiring so it can-
not touch any moving parts, such as
the gear shift, parking brake and seat
rails. Do not route wiring in places that
get hot, such as near the heater outlet.
If the insulation of the wiring melts or
gets torn, there is a danger of the wir-
0.75 m (2 ft. 6 in.)
ing short-circuiting to the vehicle body.
MHL adapter
• Secure the High Speed HDMI
using the holder provided with your
vehicle's unit.
Information to User
Alteration or modifications carried out with-
out appropriate authorization may invalidate
the user's right to operate the equipment.
If you want to dispose this product,
do not mix it with general house-
hold waste. There is a separate
collection system for used elec-
tronic products in accordance with
legislation that requires proper
treatment, recovery and recycling.
Private households in the member states
of the EU, in Switzerland and Norway may
return their used electronic products free
of charge to designated collection facili-
ties or to a retailer (if you purchase a simi-
lar new one). For countries not mentioned
above, please contact your local authori-
ties for the correct method of disposal.
By doing so you will ensure that your dis-
posed product undergoes the necessary
treatment, recovery and recycling and
thus prevent potential negative effects on
the environment and human health.
WARNING:
Specifications
Handling the cord on this product or
Operation temperature range
cords associated with accessories sold
with the product may expose you to
........–10 ºC to +60 ºC (+14 ºF to +140 ºF)
chemicals listed on proposition 65 known
Storage temperature range
to the State of California and other gov-
........–20 ºC to +80 ºC (–4 ºF to +176 ºF)
ernmental entities to cause cancer and
birth defect or other reproductive harm.
Dimensions
Wash hands after handling.
MHL adapter (W×H×D)
Important safeguards
........41 mm × 15 mm × 45 mm
This manual explains how to connect the
in-vehicle product via the connectivity kit.
®
Cable
Weight
For details of the operation of the con-
MHL adapter .................50 g (0.1 lbs)
nected product, refer to another manual.
• Read this manual fully and carefully
Note:
before installing this product.
Specifications and design are subject to
• Keep this manual handy for future reference.
possible modifications without notice
• Pay close attention to all warnings in this
due to improvements.
manual and follow the instructions carefully.
• Do not install this product where it may
(i) obstruct the driver's vision, (ii) impair
the performance of any of the vehicle's
operating systems of safety features,
including airbags, hazard lamp but-
tons, or (iii) impair the driver's ability
to safely operate the vehicle. In some
cases, it may not be possible to install
this product because of the vehicle type
or the shape of the vehicle interior.
• Make sure that the cables and wires
are routed and secured so they will not
interfere with or become caught in any
of the vehicle's moving parts, especial-
ly the steering wheel, shift lever, park-
ing brake, sliding seat tracks, doors, or
any of the vehicle's controls.
(1-5/8 in. × 5/8 in. × 1-3/4 in.)
Advertisement
Table of Contents
