Monitor Out; Wired Lan - BenQ MX819ST User Manual

Function
Closed
Caption
Standby
Settings
Network
Settings
Reset All
Settings
44 Operation
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed captioned
(usually marked as "CC" in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).
Network
Selecting On enables the function. The projector is able to provide the
network function when it is in standby mode.

Monitor Out

Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER-1 jack is
correctly connected to devices. See
to make the connection.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
for how to make the connection.
Enabling this function slightly increases the standby power consumption.

Wired LAN

See BenQ Network Projector Operation Guide
AMX Device Discovery
When AMX Device Discovery is On, the projector can be detected
by AMX controller.
MAC Address
Displays the mac address of this projector.
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Phase, User 1, User 2,
Reference Mode, Language, Projector Installation, High Altitude
Mode, Security Settings, Network Settings and Baud Rate.
Description
"Connection" on page 17
"Connection" on page 17
for how
/ to
for details.