Connection - BenQ MX819ST User Manual

Connection

When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
• In the connections shown below, some cables may not be included with the projector (see
contents" on page
• The connection illustrations below are for reference only. The rear connecting jacks available on the
projector vary with each projector model.
(VGA)
1
1. VGA cable
2. VGA to DVI-A cable
3. USB cable
4. HDMI cable
5. Component Video to VGA (D-Sub)
adapter cable
• Many notebooks do not turn on their external video ports when connected to a projector. Usually a key
combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/
LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key
simultaneously. Refer to your notebook's documentation to find your notebook's key combination.
• The D-Sub output only works when an appropriate D-Sub input is made to the COMPUTER-1 jack.
8). They are commercially available from electronics stores.
Monitor
Notebook or desktop computer
(DVI)
2 3 1
A/V device
9 4 5 9 6
or
6. Audio L/R cable
7. S-Video cable
8. Video cable
9. Audio cable
"Shipping
Speakers
7 8
or
Connection
9
17