ADJUSTING THE VIEWING ANGLE
Do not touch the Touch screen when you change the angle. It may cause damage or
NOTE
break the Touch screen and LCD screen.
Careful attention is required not to catch your fi ngers or hands when you change the angle.
For optimal viewing it is recommended to look at the full face of the monitor.
You are able to adjust the monitor's height up to 395mm - 120mm (ProLite T2336MSC) or 385mm -
128mm (ProLite T2236MSC), angle up to 90 degrees upward and 5 degrees downward.
Hold the stand so that the monitor does not topple when you change the monitor's angle.
Put the monitor on a fl at surface.
Hold the panel so that the monitor does not topple.
We recommend that you adjust the stand to its lowest position when using the monitor in the
90 degree upward tilt position.
ProLite T2336MSC
120mm
ProLite T2236MSC
128mm
upward
upward
90°
BEFORE YOU OPERATE THE MONITOR 9
5°
Need help?
Do you have a question about the ProLite T2236MSC and is the answer not in the manual?