Computer Setting - Iiyama ProLite T2236MSC User Manual

COMPUTER SETTING

 Signal Timing
Change to the desired signal timing listed on page 25: COMPLIANT TIMING.
 Windows XP/Vista/7/8 Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs
on Windows XP/Vista/7/8 by connecting the monitor to DDC2B compliant computer with the
Signal Cable supplied.
For installation on Windows XP: The monitor Information File for iiyama monitors may be
necessary for your computer and obtained via the Internet, using the address:
 For additional information on how to download the driver for your touch screen monitor,
NOTE
please access the internet site noted above.
 Monitor Drivers are not required in most cases for Macintosh or Unix operating
systems. For further information, please contact your computer dealer fi rst for advice.
 Procedure for turning ON the Power Switch
Turn ON the monitor fi rst, and then the computer.
 Touch screen driver software
Touch screen driver software and system may not start when you start your computer while
touching the screen.
Touch screen driver software may not run due to the power saving function depending on the
BIOS of your computer. In this case, set the power saving function to off.
8 BEFORE YOU OPERATE THE MONITOR
http://www.iiyama.com