Specifications And Requirements; Specifications - Yamaha F30B Owner's Manual

EMU34520

Specifications

TIP:
"(AL)" stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, "(SUS)" represents the value for
stainless steel propeller installed and "(PL)"
for plastic propeller installed.
TIP:
"*" means, select the engine oil referring to
the chart of engine oil paragraph. For further
information, see page 12.
EMU2821J
Dimension:
Overall length:
F30BEHT 1362 mm (53.6 in)
F30BET 717 mm (28.2 in)
F40FEHD 1362 mm (53.6 in)
F40FEHT 1362 mm (53.6 in)
F40FET 717 mm (28.2 in)
Overall width:
384 mm (15.1 in)
Overall height L:
1350 mm (53.1 in)
Transom height L:
536 mm (21.1 in)
Weight (AL) L:
F30BEHT 104.0 kg (229 lb)
F30BET 98.0 kg (216 lb)
F40FEHD 102.0 kg (225 lb)
F40FEHT 104.0 kg (229 lb)
F40FET 98.0 kg (216 lb)
Performance:
Full throttle operating range:
5000–6000 r/min
Maximum output:
F30BEHT 22.1 kW@5500 r/min
(30 HP@5500 r/min)
F30BET 22.1 kW@5500 r/min

Specifications and requirements

Engine:
(30 HP@5500 r/min)
F40FEHD 29.4 kW@5500 r/min
(40 HP@5500 r/min)
F40FEHT 29.4 kW@5500 r/min
(40 HP@5500 r/min)
F40FET 29.4 kW@5500 r/min
(40 HP@5500 r/min)
Idle speed (in neutral):
800 50 r/min
Type:
4-stroke L
Displacement:
3
747.0 cm
Bore  stroke:
65.0  75.0 mm (2.56  2.95 in)
Ignition system:
CDI (micro computer)
Spark plug with resistor (NGK):
DPR6EB-9
Spark plug gap:
0.8–0.9 mm (0.031–0.035 in)
Control system:
F30BEHT Tiller handle
F30BET Remote control
F40FEHD Tiller handle
F40FEHT Tiller handle
F40FET Remote control
Starting system:
Electric starter
Starting carburetion system:
Electronic fuel injection
Valve clearance (cold engine) IN:
0.15–0.25 mm (0.0059–0.0098 in)
Valve clearance (cold engine) EX:
0.25–0.35 mm (0.0098–0.0138 in)
Min. cold cranking amps (CCA/EN):
430.0 A
Min. rated capacity (20HR/IEC):
70.0 Ah
Maximum generator output:
9