Proofer Door Hinge Reversal - Nu-Vu SUB-123P Service And Repair Manual

PROOFER DOOR REVERSAL SUB–123P SERVICE AND REPAIR MANUAL

PROOFER DOOR HINGE REVERSAL

Drawing 6
1. Remove doors, hinges, and strike from the proofer.
2. Install steel plugs in all existing hinge and handle holes.
3. Locate the new hinge holes on the proofer. Ø.136 holes are punched in the jamb to locate where
the holes should be drilled.
4. Drill out each hole with a #30 drill bit. Follow with a 5/32" bit. Tap 10-32.
5. Install new hinges and strike plate.
6. Hang door and make needed adjustments on strike plate.
Tools required:
Phillips screwdriver
3/8" wrench
Reversible drill (corded or cordless)
#30 drill bit (can be ordered from Nu-Vu, P/N 51-0624)
5/32" drill bit (can be ordered from Nu-Vu, P/N 51-0194)
10-32 tap (can be ordered from Nu-Vu, P/N 51-0296)
Parts required:
Hinges (2 required)
11/64" Hole plugs (8 required), Nu-Vu P/N 53-0233
®
NU-VU FOOD SERVICE SYSTEMS MENOMINEE, MICHIGAN 49858-0035
6 Sales Fax (906) 863-5889 ♦ Service Fax (906) 863-6322 (800) 338-9886
page