Sunbeam SR8700 Instruction Booklet page 13

Care and Cleaning (continued)
8. Shake the unit back and forth to
dislodge any scale build up on the
base of the boiler. Leave for 10
minutes.
9. Shake the unit again to swirl the
solution around inside the boiler.
10. Place the unit on a sink or vessel so
that solution can be expelled from the
boiler.
11. Carefully remove the calc clean valve
and ensure the descaling solution is
emptied.
12. Rinse with 400ml of water (90 degrees
is recommended) clean water, shake
and empty. Repeat rinsing process at
least 2 times.
13. Once you have completed the
descaling process, and refilled the
tank, press and hold the Power button
for 3 seconds to switch off the Calc
Clean indicator light. The power light
will illuminate and the unit will begin
heating as normal.
13