68 resilium shot & spray iron with safety auto-off; 66 stainless shot & spray iron with safety auto-off; 65 platinum shot & spray iron with safety auto-off; 62 platinum shot & spray iron (12 pages)
Summary of Contents for Sunbeam Steam Pro Non-Stop SR8600
Page 1
Steam Pro Non-Stop Professional ironing system Instruction Booklet SR8600 Please read these instructions carefully and retain for future reference.
Contents Sunbeam’s Safety Precautions Features of your Steam Pro Non-Stop Using your Professional Ironing System Care and Cleaning Ironing Guide Ironing Chart Important instructions – retain for future use.
If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. • An iron takes approximately 30 minutes to cool down.
Features of your Steam Pro Non-Stop Thermostat light The thermostat light illuminates to indicate that the iron soleplate is heating, and goes out when it has reached the temperature selected on the temperature dial. The thermostat light cycles on and off during ironing as the iron soleplate maintains the selected temperature.
Page 5
Cord minder Use the cord minder to keep the iron cord clear of the ironing surface, to prevent it creasing garments during ironing. Lock-down steam button Press and hold the steam button to produce a constant flow of high-powered steam. When ironing for long periods, the steam button can be conveniently locked-down, eliminating the need to hold the button during ironing.
Lift the water tank cover. Using a jug with a pouring spout, slowly pour water into the inlet. Close the cover. Note: Sunbeam recommends the use of distilled or demineralised water. For best performance, we recommend the use of Sunbeam Water Demineraliser, available from Sunbeam Service Centres and selected retail outlets.
Page 7
Using your Professional Ironing System (continued) 5.Press and hold the steam button to iron with steam. When ironing for long periods, the steam button can be locked-down, eliminating the need to hold the button during ironing. Press and slide the steam button back towards the handle until it locks into place.
Care and Cleaning To clean the exterior of your professional ironing system, wipe over with a damp soft cloth and wipe dry. Do NOT use harsh abrasives, chemical cleaners or solvents to clean the exterior of your appliance, as these will damage the surface.
Ironing Guide Selecting the ironing temperature Always read garment labels and follow the manufacturer’s ironing instructions. Refer to the ironing chart for temperature recommendations. Hints for easier ironing • Sort articles to be ironed according to the type of fabric. This will reduce the need to adjust the temperature to suit varying garments.