Summary of Contents for Sunbeam Steam Pro Compact SR8200
Page 1
Steam Pro Compact Professional Ironing System Instruction Booklet SR8200 Please read these instructions carefully and retain for future reference.
Contents Sunbeam’s Safety Precautions Features of your Steam Pro Compact Using your professional ironing system Care and cleaning Ironing guide Ironing chart...
If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. • Iron only on an ironing board.
Features of your Steam Pro Compact Iron thermostat light The iron thermostat light illuminates to indicate that the iron soleplate is heating, and goes out when it has reached the temperature selected on the temperature dial. The thermostat light cycles on and off during ironing as the iron soleplate maintains the selected temperature.
Page 5
professional ironing system Steam release button Press and hold the steam release button to produce a constant stream of high-powered steam to reduce your ironing time and effort. Steam will not be emitted from the iron when the steam release button is not depressed. Variable temperature dial The variable temperature dial adjusts the temperature of the iron soleplate, allowing...
Note: The non-corrosive stainless steel boiler has been designed to allow you to use tap water in your professional ironing system. However, in very hard water areas, Sunbeam recommends the use of distilled or demineralised water. For best performance, we recommend the use of Sunbeam Water Demineraliser, available from Sunbeam Service Centres and selected retailers.
Page 7
Using your professional ironing system continued 5.Press and hold the steam release button to iron with steam. To dry iron, do not press the steam release button. Both the steam ready indicator and the boiler thermostat light will cycle on and off during ironing as the ironing system maintains the selected steam pressure and temperature level.
Care and cleaning To clean the exterior of your appliance, wipe over with a damp soft cloth and wipe dry. Do NOT use harsh abrasives, chemical cleaners or solvents to clean the exterior of your appliance, as these will damage the surface.
Ironing guide Selecting the ironing temperature. Always read garment labels and follow the manufacturer’s ironing instructions. Refer to the Ironing Chart for temperature recommendations. Hints for easier ironing • Sort articles to be ironed according to the type of fabric. This will reduce the need to adjust the temperature to suit varying garments.