Related Manuals for Sunbeam Steam Pro Non-Stop SR8500
Summary of Contents for Sunbeam Steam Pro Non-Stop SR8500
- Page 1 Steam Pro Non-Stop Professional Ironing System Instruction Booklet SR8500 Please read these instructions carefully and retain for future reference.
-
Page 2: Table Of Contents
Contents Sunbeam’s Safety Precautions Features of your Steam Pro Non-Stop Using your professional ironing system Care and cleaning Ironing guide Ironing chart... -
Page 3: Sunbeam's Safety Precautions
If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. • An iron takes approximately 30 minutes to cool down. -
Page 4: Features Of Your Steam Pro Non-Stop
Features of your Steam Pro Non-Stop Thermostat light The thermostat light illuminates to indicate that the iron soleplate is heating, and goes out when it has reached the temperature selected on the temperature dial. The thermostat light cycles on and off during ironing as the iron soleplate maintains the selected temperature. - Page 5 professional ironing system Variable steam dial The adjustable steam dial allows you to select the desired steam output for each garment, from 0 to 60 grams per minute. Cord minder Use the cord minder to keep the iron cord clear of the ironing surface, to prevent it creasing garments during ironing.
-
Page 6: Using Your Professional Ironing System
Note: The non-corrosive stainless steel boiler has been designed to allow you to use tap water in your professional ironing system. However, in very hard water areas, Sunbeam recommends the use of distilled or demineralised water. For best performance, we recommend the use of Sunbeam Water Demineraliser, available from Sunbeam Service Centres and selected retail outlets. - Page 7 Using your professional ironing system continued 5.Press and hold the steam release button to iron with steam. To dry iron, do not press the steam release button. Both the steam ready indicator and the thermostat light will cycle on and off during ironing as the ironing system maintains the selected steam pressure and temperature levels.
-
Page 8: Care And Cleaning
Care and cleaning To clean the exterior of your professional ironing system, wipe over with a damp soft cloth and wipe dry. Do NOT use harsh abrasives, chemical cleaners or solvents to clean the exterior of your appliance, as these will damage the surface. -
Page 9: Ironing Guide
Ironing guide Selecting the ironing temperature. Always read garment labels and follow the manufacturer’s ironing instructions. Refer to the Ironing Chart for temperature recommendations. Hints for easier ironing • Sort articles to be ironed according to the type of fabric. This will reduce the need to adjust the temperature to suit varying garments. -
Page 10: Ironing Chart
Ironing Chart Fabric Temperature Setting Acrylic • Acetate • Silk •• Nylon •• Polyester •• Rayon •• Viscose •• Wool •• Wool Blends •• Cotton Blends •• Corduroy ••• Cotton ••• Linen ••• To MAX Denim ••• To MAX Ironing Recommendation Dry iron on wrong side. - Page 11 Sunbeam Corporation. Designed in Italy. Made in China. Due to minor changes in design or otherwise, the product may differ from the one shown in this leaflet. Backed by Sunbeam‘s 2 Year Replacement Guarantee and National Service Network. © Copyright.
- Page 12 Consumer Hotline Australia 1800 025 059 New Zealand (09) 912 0747 www.sunbeam.com.au is a registered Trademark of Sunbeam Corporation Limited. ACN 000 006 771. © Sunbeam Corporation Limited 2003.