Vantec 3 User Manual page 11

NST-260SU only:If this is the first time you use NexStar 3,you have to run
[98se.exe] from install CD before you connect NexStar 3 to your computer
Mac OS 9.0 or later:
1) No drivers are necessary when using Mac OS 9.0 or later. If the hard drive does
not appear on the desktop, be sure to partition your hard drive.
Mac OS 8.6:
1) Unplug the NexStar 3 if you currently have it connected.
2) USB Mass Storage Support 1.3.5 must be installed on your system. If it is not,
you can download the USB Mass Storage Support 1.3.5 from the Apple
Software Updates website: http://www.apple.com/support
3) Follow the direction associated with the USB Mass Storage Support driver to
install
4) Repeat the steps listed under "Connecting the NexStar 3 to your computer."
Installation
9