Vantec NexStar 3 Installation Manual
Hide thumbs
Also See for NexStar 3:
- User manual (24 pages) ,
- Specification (1 page) ,
- User manual (19 pages)
Advertisement
Table of Contents
- 1 Verify the Package Contents
- 2 Carefully Slide out the Hard Drive Caddy of the Nexstar 3 Superspeed
- 3 Slide the Drive Caddy Back into the Aluminum Housing and Make Sure the Caddy Is Oriented Properly
- 4 Connect the Hard Drive to the SATA and SATA Power Connector
- 5 Optional USB 3.0 Y-Cable for Extra Power
- 6 Use the Provided Black Screws and Fasten the Caddy to the Enclosure
- 7 Connect the USB Cable (Power will be Drawn from the USB Port and Provide Power to the Hard Drive)
- 8 Once Formatted, the Nexstar 3 Superspeed Is Ready for Use
- Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Vantec NexStar 3
Summary of Contents for Vantec NexStar 3
- Page 2 USB 3.0 Cable...
Need help?
Do you have a question about the NexStar 3 and is the answer not in the manual?
Questions and answers