When Automatic Presetting Of Channels Are Finished; To Add Or Erase Channels - Hitachi VT-FX530A Owner's Manual

............................................................................................................................................................
7 Press GUIDE to return to regular viewing.
Note: Your VCR is capable of receiving 68 broadcast TV channels (VHF 2-13, UHF 14-69) and cable channels
(1-125). In some areas channels cannot be received when CATV1 is selected. In this case, select CATV2 in the
receiving setup.
•

When automatic presetting of channels are finished

Press the CH (channel) button (or numbered buttons) to check the channels you can receive.
Note: If no channels have been set or a clear picture does not appear, check the antenna or cable connection.
•

To add or erase channels

The auto channel set procedure may memorize channels that are blank, have snowy pictures, or
interference. You may skip these channels by erasing them. Very weak stations might not be
memorized at all. You may receive these stations by adding them.
1 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
............................................................................................................................................................
2 Press the (4) button to select the CHANNEL PRESET operation.
18