Indexing With The Time Counter - Hitachi VT-FX530A Owner's Manual

Note: Immediately after the tape is inserted, "
started, the tape remaining time is displayed.
Press the CLEAR button repeatedly to switch the type of tape is used. The correct remaining time
will appear.
AUTO: T-120 or shorter tape
T-160: T-140 or T-160 tape
T-180: T-180 tape
T-210: T-210 tape
Notes:
• The tape remaining time is not displayed correctly for a tape without any recordings or tapes other than
T-30/60/90/120/140/160/180/210.
• The remaining time may not be displayed correctly during fast forwarding or rewinding.

INDEXING WITH THE TIME COUNTER

•
To find specific sections on a tape
Indexing with the Time Counter
You can set the time counter to memorize a certain point in the video programming, and you can return to that
point automatically.
1 Press the DISP button two or three times.
The counter will appear in the VCR's display.
Remote Control Illustration.
............................................................................................................................................................
2 Begin recording or playing back a tape.
............................................................................................................................................................
3 At the point that you want to go back to, press the CLEAR button.
This resets the counter to 0:00:00.
............................................................................................................................................................
4 Press the STOP button when you are done recording or playing back the tape.
-:--
" will appear. 2 minutes after playback or recording is
30