Setting The Clock-Automatic Mode - Hitachi VT-UX6430A Owner's Manual

Hide thumbs Also See for VT-UX6430A:
Table of Contents

Advertisement

Llote: An antenna
or cable must be connected
to the VCR before
you begin this operation.
I "13ps
You'll
need to set the clock when
first hooking up your VCR, and
any time the power goes out
more than 30 seconds.
When you first plug in the VCR or
after a power outage, the clock
display will read "
:
".
Auto clock set function
This function
sets the VCR's clock automatically
when the VCR is tuned
to a station which transmits
a time signal together
with rv programs.
It also automatically
sets the time differences
between various time
zones and sets the time during Daylight Saving Time (D.S.T). The auto
clock set function operates each time the VCR is turned off.
Some broadcast stations may not transmit
a time signal. The auto
clock set function
does not operate when the VCR is tuned to a
station which does not transmit
a time signal. In this case, set the
clock manually (See page 20).
When the clock is set automatically,
the displayed time may drift
from the current time by up to one minute.
Setting
the clock automatically
-- if your VCR's hooked
up to an antenna
or cable
without
a cable box (Hookups
_],
[],
[]
or [-_)
IF
I
POWER
O
Press the POWER button to turn
the VCR power off,
If the VCR is already turned off,
press the POWER button to turn
the power on, then press it again
to turn the power off. The time
will appear in the VCR display to
show that the current time has
been set. The automatic c_ock set
procedure might take about 5
minutes.
I •/ 20
I/
eeoo
eeoe
ee
@ o,
e*
oo
ooo
Dolet
@,OeOOeO@eQo
IOOOe,OOeOO
Notes:
If the clock is not set after about five minutes have elapsed,
the clock
must be set manually
(see page 20).
When the VCR power
is restored after a power failure of more than
30 seconds, the clock will indicate
"--:--", and the clock set procedure
(automatic
or manual) must be repeated.
If the time displayed on the VCR drifts from the current time by more
than one hour, select your correct time zone and set the DST
(Daylight Savings Time) (see page 19).
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vt-ux6440a

Table of Contents