When Automatic Presetting Of Channels Are Finished; To Add Or Erase Channels - Hitachi VT-UX615A Owner's Manual

PRE-TUNING THE VCR TUNER
The VCR will automatically store channels received in your area. It takes about 2 - 3 minutes.
After the channels are stored in memory, the channel with the lowest number appears in the
VCR's display.
7 Press GUIDE to return to regular viewing.

When automatic presetting of channels are finished

Press the CH (channel) button (or numbered buttons) to check the channels you can receive.
Note: If no channels have been set or a clear picture does not appear, check the antenna or
cable connection.

To add or erase channels

The auto channel set procedure may memorize channels that are blank, have snowy pictures,
or interference. You may skip these channels by erasing them. Very weak stations might not
be memorized at all. You may receive these stations by adding them.
1 Press the GUIDE button. Click to see remote control illustration.
The main on-screen menu will appear on the TV screen.
2 Press the (4) button to select the CHANNEL PRESET operation.
33