Editing Recorded Tracks - Sony MZ-R55 User Manual

MZ-R55 manual
repeatedly.
pressed again...
" SHUF" (shuffle repeat)
All the tracks are played
prepeatedly in random order.
Connecting to a stereo system
Connect the LINE OUT jack of the recorder to the line in jacks of an amplifier or a tape player with a
line cable (not supplied). The output is analog. The recorder plays the MD digitally and sends analog
signals to the connected equipment.

Editing Recorded Tracks

You can edit your recordings. Premastered MDs cannot be edited.
Notes
-When you press after editing, "Toc Edit" flashes for about a second. Do not move or jog the
recorder or disconnect the power source while the indication is flashing.
-You cannot edit on an MD with its tab open for protection. Before editing, close the tab at the side of
the MD.
Erasing a track
You can quickly erase a recorded track. Note that once a recording has been erased, you cannot
retrieve it.
Press the EDIT/ENTER button while playing the track you want to erase.
1
" : Name" flashes in the display, and the recorder plays the selected track repeatedly. Check the
track number in the display
2
Press .or repeatedly unitl "
Press EDIT/ENTER again. "Erase Ok?" and "Push ENTER" appear alternately in the display. To
3
cancel erasing, press
To erase a part of a track
Add track marks at the beginning and the end of the part you want to erase, then erase the part.
Erasing a whole disc
http://www.hip.atr.co.jp/~eaw/minidisc/mzr55_user_manual/manual.htm
: Erase " flashes in the display.
.
Page 13 of 20
2/9/99