Sony MZ-R55 User Manual page 10

MZ-R55 manual
1 Slide the SYNCHRO REC switch to ON.
"SYNC" lights up in the display.
Press and slide the REC switch to the right.
2
"REC" lights up in the display.
The recorder starts recording when you start playing the source player.
To stop recording, press
Tips
-You cannot pause recording manually during synchro-recording.
-When there is no sound from the source player for more than 3 seconds during synchro-recording, the
recorder stands by for recording automatically. When the sound comes from the source player, the
recorder starts synchro-recording again. When the MD player is in recording pause for longer than 5
minutes, reocrding stops automatically.
Note
Do not switch SYNCHRO REC after step 2. Recording may not be made properly.
Recording from a microphone
Connect a microphone to the MIC (PLUG IN POWER) jack. Use a stereo microphone (ECM-717,
ECM-MS097, ECM-MS957, etc., not supplied).
Select the sensitivity with the MIC SENS switch.
1
Usually, set it to HIGH. When recording loud sounds such as a live concert, set it to LOW.
Insert a recordable MD.
2
Slide the OPEN switch to open the lid, insert a recordable MD, and close the lid.
3 Press and slide the REC switch to the right.
"REC" lights up and recording starts.
To stop recording, press
Recording in monaural for double the normal recording time of an MD
Before recording, make connections tot he sound source and the power source, and insert a recordable
MD.
http://www.hip.atr.co.jp/~eaw/minidisc/mzr55_user_manual/manual.htm
.
.
Page 10 of 20
2/9/99