Sony MZ-R55 User Manual page 11

MZ-R55 manual
1 While pressing , press and slide the REC switch to the right.
The recorder stands by for recording.
Press the MODE button.
2
"Mono REC" appears in the display, and the recorder switches to monaural recording.
3 Press again to start recording.
4 Start the sound source.
Tips
-The recorder switches back to stereo recording when you press
-If you record in monaural from a stereo source, the sounds from left and right will be mixed.
-The MDs recorded in monaural can be played back only with an MD player/recorder that has the
monaural playing function.
Adjusting the recording level (Manual recording)
When you record with an analog (line) input, the sound level is adjusted automatically. If necessary,
you can set the level manually.
While holding down , hold the REC switch to the right for more than 2 seconds.
1
"ManualREC" appears, and the recorder stands by for recording.
2 Play the source.
While observing the level meter in the display, adjust the recording level by pressing
3
(-).
Set the level so that it hits the seventh indicator from the bottom at maximum input level.
4
Press again to start recording.
Tips
-The recorder switches back to automatic level adjustment when you press
-The recording level should be adjusted while the recorder is in standby mode. You cannot adjust it
while recording.
Setting the clock to stamp the recorded time
To stamp the date and time on the MD when you record, you need to set the clock.
http://www.hip.atr.co.jp/~eaw/minidisc/mzr55_user_manual/manual.htm
Page 11 of 20
to stop recording.
to stop recording.
(+) or
2/9/99