Sony MZ-R55 User Manual page 5

MZ-R55 manual
The headphones with a remote control
1
Headphones -- Can be replaced with optional headphones.
2
Stereo mini plug
3
(stop) button
4 Control -- To play, turn to
beginning of the succeeding track; hold in this position to fast-forward. Turn to
to search the beginning of the preceeding track; hold in this position to rewind.
5
HOLD switch -- Slide to lock the controls of the remote control.
6
(pause) button
7
PLAY MODE button
8 DISPLAY button
9 VOL (volume) +/- buttons -- When the AVLS switch is set on, you cannot increase the volume to
the maximum. To increase the volume above the limited level, set teh AVLS switch to off.
10
TRACK MARK button
11
Display window
MD recording
Recording an MD right away!
Use a line cable (not supplied) to hook up an analog source. The source sound of CDs or tapes will be
sent as an analog signal and recorded digitally. If you want to record programs from digital
equipments or a microphone, see
over.
Make connections.
1
Connect the LINE IN (OPTICAL) jack of recorder to the LINE OUT R(red)/L(white) jacks
l
of the source with a line cable. The recorder switches to analog input automatically.
Connect the DC IN 3V jack of the recorder to a wall outlet with the supplied AC power
l
adaptor.
When the recorder has different sound sources connected at the same time, the recorder switches to
the digital, microphone, or analog input in this order of priority.
2 Insert a recordable MD.
Press OPEN switch and open the lid.
l
http://www.hip.atr.co.jp/~eaw/minidisc/mzr55_user_manual/manual.htm
during stop. Turn to
"Various ways of recording". Premastered MDs cannot be recorded
Page 5 of 20
during play to search the
during play
2/9/99