Sony MZ-R55 User Manual page 14

MZ-R55 manual
You can erase all the tracks on a disc at a time. Note that once a recording has been erased, you cannot
retrieve it.
1
Press EDIT/ENTER on the recoder
2
Press or repeatedly until "
3 Press EDIT/ENTER again. "All Erase?" and "Push ENTER" appears alternately in the display.
To cancel erasing, press
4 Press EDIT/ENTER again "TOC Edit" in the display and all the tracks will be erased and all
the tracks will be erased. When erasing is complete, "BLANK DISC" appears in the display.
Adding a track mark
You can insert a track mark into a track.
1 While the recorder is playing or pausing an MD, press T MARK button on the recorder at the point
you want to mark.
"MARK ON" appears in the display, and the track mark is added.
To add track marks while recording
Press T MARK button while recording (except while Synchro-recording).
Erasing a track mark
When you record with analog (line), input, unnecessary track marks may be recorded. You can erase a
track mark to combine the tracks before and after the track mark.
1
While playing the track with the track mark you want to erase, press
2 Find the track mark by pressing
"00:00" flashes in the display.
Press the T MARK button to erase the mark.
3
The track mark is erased and the two tracks are combined. The number of the newly combined
track will be that of the first track and the succeeding tracks will be renumbered.
http://www.hip.atr.co.jp/~eaw/minidisc/mzr55_user_manual/manual.htm
: Erase " flashes in the display.
or T MARK.
slightly.
Page 14 of 20
to pause.
2/9/99