Table of Contents
Advertisement
The standby time for myPower ALL Plus is one year when fully charged. After a year, the battery will likely
be fully discharged. For maximum performance, the myPower ALL Plus battery should complete a full
charge cycle at least once every six months.
Charging myPower ALL Plus
Charging with a Laptop Power Adapter
To eliminate the need to carry a separate power adapter, you will use your laptop power adapter to charge
MP3750. If your laptop power adapter plug does not fit the MP3750 DC IN jack, you must use the input
adapter tip that is compatible with your laptop (provided in the package) to connect the power adapter to
MP3750. Please note that if the power adapter is not the original supplied with the laptop, you must use a
power adapter with the same output voltage and output current as the original.
myPower ALL Plus will charge in four hours when completely empty. The green charging indicator will
turn on after the battery is 80% charged. Therefore, you should view the actual battery capacity before
disconnecting the power adapter to stop charging. (Before using myPower ALL Plus for the first time, you
must charge the device for four hours.)
1. Slide the switch to MANUAL.
2. Plug your power adapter into the DC IN jack on MP3750.
OR
If your power adapter plug does not fit the jack, select the input adapter tip that fits
your laptop power adapter. Connect the input adapter tip to the laptop power
adapter, and plug the other end into the DC IN jack on the end of MP3750.
3. Plug the power adapter into a wall outlet. The red charging indicator will turn
on to indicate the battery is charging and is less than 80% charged.
4. When the charging indicator turns to green, press the Capacity Display button to
view the battery capacity. If the capacity does not indicate full (all green LEDs
on), continue to charge the battery until the battery capacity indicates full.
5. When the battery capacity indicates full, unplug the power adapter.
4
Advertisement
Table of Contents
