Deleting A Nuisance Channel; Adding A Deleted Nuisance Channel Back Into; The Scan List; Using The Scan Button - Motorola GP-388R Manual

DELETING A NUISANCE CHANNEL

If a channel continually generates unwanted calls/
noise (a "nuisance" channel), you can temporarily
remove it from the scan list by performing a
Nuisance Channel Delete operation:
1. While the radio is on the Nuisance Channel,
press and hold the Nuisance Delete button
until you hear the scan start alert tone.
2. Release the Nuisance Delete button.
Note: You cannot perform a Nuisance Channel
Delete on a priority channel or if there is only
one remaining channel in the scan list.
ADDING A DELETED NUISANCE CHANNEL
BACK INTO THE SCAN LIST

Using the Scan Button

1. Press the Scan button to stop scanning. The
scan stop alert tone will sound.
2. Press the Scan button again to re-start
scanning. The scan start alert tone will sound,
and the scan list will contain all programmed
channels.

Using the Menu

1. Follow the instructions for selecting Scan On/
Off via the menu
2. Select Scan Off. Your radio will stop scanning,
the scan stop alert tone will sound, the display
icon G and the LED indicator will be
extinguished.
3. Select Scan On. Your radio will re-start
scanning, the scan start alert tone will sound,
the display icon G will be lit , the LED
indicator will blink green and the scan list will
contain all programmed channels.

CALL FORWARD

You can call forward calls to your radio to
another radio if you are unable to take calls or
are away from your radio.
You can switch On or Off Call Forward by
using a pre-programmed Call Forward button
or via the menu.

Using the Call Forward Button

1. Press the Call Forward button to switch on
Call Forward, when the feature enable alert
will sound and the display will show:
2. Press the Call Forward button again to switch
off Call Forward when the feature disable alert
English
41