Deleting A Nuisance Channel; Adding A Deleted Nuisance Channel; Back Into The Scan List - Motorola GP-344R User Manual

DELETING A NUISANCE CHANNEL

If a channel continually generates unwanted calls/
noise (a "nuisance" channel), you can temporarily
remove it from the scan list by performing a
Nuisance Channel Delete operation:
1. While the radio is on the Nuisance
Channel, press and hold the Nuisance
Delete/Cancel button until you hear the
scan start alert tone
2. Release the Nuisance Delete/Cancel button.
Note:You cannot perform a Nuisance Channel Delete
on a priority channel or if there is only one
remaining channel in the scan list.
English 22

ADDING A DELETED NUISANCE CHANNEL

BACK INTO THE SCAN LIST

1. Press the Scan button to stop scanning.
The scan stop alert tone
2. Press the Scan button again to re-start
scanning. The scan start alert tone
list will contain all programmed channels.
.
will sound.
will sound, and the scan