Keypad Edit; Method 1 - Motorola GP-388R Manual

Once the desired address is displayed, there are
two methods to select the address:

Method 1

c to confirm your selection.
Display shows:
(for 2 seconds)
Method 2
Press the PTT button or Call 1-4 to select
address and make the call.
Call 1-4 are pre-programmed call buttons.
Note: During a call you may enter the contact list
as described above and make another call
to a third party, or initiate a new call. In either
case the call may be a voice or status call.

Keypad Edit

If the radio is displaying a Contact List number, a
Keypad Dialled number or a Status number, the last
digit may be deleted by:
For Aliases, eg:
English 28
d or f
1
Once
(to select
number)
d Again
2
(to delete last
digit)
For Numbers, eg:
d Once
3
(to delete last
digit)
4 Enter new
numbers
5 PTT button to make radio call.
Note: The edited number is not saved at the end of
the call in the contact list, but is saved in the
last number redial.